This bra size calculator turns two tape measurements into a practical starting point for trying on bras. Enter your underbust and bust, then compare US, UK, European, French and Australian labels for the same estimate. The bra size calculator also shows sister sizes, a nearby fit grid and a comparison with the traditional +4 approach. A number cannot describe every breast shape, fabric or personal comfort preference, so use the result to guide a fitting rather than to overrule how a garment feels.
How to use this bra size calculator
A three-step bra size calculator routine
Start with a flexible measuring tape and choose inches or centimeters. The bra size calculator opens with a worked example so you can see the output immediately. Replace both example measurements with your own figures. Keep the tape level around your body, read it without twisting, and measure again if the first reading seems unfamiliar.
Next, read the starting size and select the label system printed on the bra you want to try. Finally, use the fit checklist and sister-size grid to decide what to test beside that size. The bra size calculator updates in place, with no submission form, email request or need to create an account.
Measurements for the bra size calculator
For underbust, place the tape directly below the breasts around the ribcage. It should feel snug without digging in. Stand naturally, breathe out normally and check that the tape stays horizontal across your back. The bra size calculator needs this body measurement, not the band number from an existing bra or the length of its elastic.
For bust, bring the tape around the fullest part without squeezing the tissue. Avoid thick padding or inserts that add to the measurement. A mirror can help you spot a sloping tape. If you repeat the reading, enter a representative measurement instead of the smallest number. Consistent technique makes the bra size calculator more useful than adding extra decimal places.
Related tools: Body measurement visualizer · Body shape calculator · Female body visualizer
The no-+4 bra size calculator formula
The bra size calculator first converts the measurements to inches for its fitting rule. It rounds underbust to the nearest even band: band = 2 × round(underbust ÷ 2). Exact halfway values round upward. It then subtracts that band from bust and rounds the difference to the nearest whole inch to select a cup step.
A rounded difference of zero or less uses AA; one inch uses A, two B, three C and four D. The bra size calculator continues with US DD, DDD/F, G and later letters, while the UK sequence includes DD, E, F and FF. Supported labels span bands 28–46 and cups through US N or UK JJ. These are the limits of this tool, not limits on bodies or available garments.
A bra size calculator example at a rounding boundary
With an underbust of 31 inches and bust of 36 inches, the bra size calculator rounds the band to 32. The difference is four inches, producing US 32D and UK 32D. Its converted labels are EU 70D, FR 85D and AU 10D. The neighboring sister sizes in US labels are 30DD and 34C.
At 30.9 inches underbust with the same 36-inch bust, the bra size calculator selects band 30, leaving a six-inch difference: US 30DDD/F or UK 30E. This jump reflects a discrete sizing boundary, not a sudden physical change. If repeated measurements straddle the boundary, treat both nearby recommendations as candidates and compare their actual fit.
How the bra size calculator converts international labels
The bra size calculator uses the published Wacoal and Freya conversion tables, which agree across their overlapping labels. Wacoal supplies the smaller cup labels and upper band entries; Freya extends the smaller band and larger cups. The tables use US DDD; this tool displays DDD/F to make a common alternative label recognizable. Always check the particular manufacturer’s chart.
Choosing centimeters does not activate a separate European fitting calculation. The bra size calculator preserves the same measurements and recommendation, then changes the displayed units. EU and FR are converted labels from that recommendation, not independently estimated sizes. This is a documented brand-table convention, not a claim that every manufacturer follows one universal international standard.
Reading the bra size calculator sister-size grid
A sister size changes band and cup together: move one band step smaller and one cup step larger, or one band step larger and one cup step smaller. The bra size calculator marks these approximately equivalent volumes on a diagonal, including the starting size in the center. The remaining cells are nearby fitting options with different cup volumes.
The bra size calculator leaves a cell empty when its band or cup falls outside the supported table. It never invents a negative cup step or extends the chart silently. Use an available sister size when testing a different band fit, but remember that similar cup volume does not promise the same wire width, cup depth or overall comfort.
Why the +4 comparison can look very different
For comparison, the bra size calculator adds four inches to underbust, rounds the result upward to an even band, then repeats the cup calculation. The 31-inch underbust and 36-inch bust example becomes 36AA. That larger band label and smaller cup letter explain why a second calculator can appear to disagree even when you entered identical measurements.
The bra size calculator presents +4 as an explicit alternative rule rather than a second recommendation. A brand may use its own measurement ranges, garment construction or fitting instructions. Read those instructions before comparing answers. If the +4 band would exceed this tool’s conversion table, the comparison is omitted and the reason is shown instead of supplying an unsupported size.
Checking a bra size calculator result for comfort
After using the bra size calculator, check the band, cups and wires while wearing the garment. The band should remain level, with support that does not depend on overtight shoulder straps. Cups should contain the breast tissue without persistent gaping or overflow, and underwires should surround the tissue rather than sit on it. Move your arms and sit down as part of the check.
The bra size calculator cannot see shape, asymmetry or fabric stretch. A molded cup and a flexible seamed cup can behave differently in the same labelled size. If one area fits while another does not, a different shape may help more than another number. Seek fitting advice when several sizes feel wrong rather than repeatedly forcing the calculation to match a preferred label.
When to repeat your bra size calculator measurements
Use the bra size calculator again after a substantial weight change or when your usual bras start fitting differently. The related body measurement visualizer can help you understand where circumference measurements sit; the body shape calculator compares broader proportions. The female body visualizer offers a separate illustration of overall measurements. None of these tools determines bra fit from appearance.
Two circumference readings are a limited description. The bra size calculator may be insufficient during breastfeeding, pregnancy, after surgery or with pronounced asymmetry. A specialist fitting can consider factors the form does not ask about. Measurements remain in the current browser page and are not saved by this tool. Usage events contain actions and field names, without the measurement values.
Frequently asked questions
How accurate is this bra size calculator?
The bra size calculator provides a starting size, not a guaranteed fit or medical assessment. It uses two measurements and a published label-conversion convention. Breast shape, bra construction and personal comfort can require a different size or style. Try the result on and check how it behaves while moving.
How does the bra size calculator round 31 inches?
The bra size calculator rounds underbust to the nearest even inch, with exact ties rounding upward. Thirty-one sits exactly between 30 and 32; 30.9 is closer to 30. Because cup size uses bust minus the selected band, the cup label changes too.
Does changing units alter the bra size calculator result?
No. The bra size calculator stores the underlying measurements in centimeters and changes only their display when you switch units. It does not recalculate EU sizes using a separate method. Editing a measurement changes the estimate; repeatedly switching units does not.
Which bra size calculator squares are sister sizes?
No. The bra size calculator marks only the diagonal as approximately the same cup volume: the center recommendation and up to two sister sizes. Other squares change volume as well as fit. Near the supported chart boundaries, some options are unavailable and remain blank.
Why does a brand differ from this bra size calculator?
A brand may use +4, different rounding, its own measurement ranges or different cup labels. This bra size calculator makes its rule explicit so you can compare the methods. The manufacturer’s garment chart and an actual fitting remain useful even when two calculators agree.
What happens outside the bra size calculator range?
The bra size calculator stops and explains which measurement cannot be represented, rather than replacing it with the closest supported size. Check the tape and units first. If the reading is correct, consult a specialist brand or fitting service with a broader range.
Sources and methodology
- Wacoal: International Size Guide — band and cup label conversions
- Freya: International Size Guide — extended band and cup conversions
- Wacoal Singapore: How to measure bra size
- Bravissimo: Sister sizes and approximate cup volume
- Bravissimo: Bra fitting guide
Methodology published by Body Visualizer. Updated . Educational estimates; not a medical diagnosis or personalized treatment.