Height Predictor: Estimate Your Child’s Adult Height

Use this height predictor with both biological parents’ measured heights. See boy and girl estimates together, compare Tanner and AAP ranges, and place each target height in the US CDC reference at age 20.

Mid-parental target height

Boy: 5 ft 10.1 in · Girl: 5 ft 5 in

Height predictor from parents’ heights

Units
Child’s sex used by the formula
ftin
ftin

Boy

5 ft 10.1 in

Mid-parental target height

Tanner range ±8.5 cm
5 ft 6.7 in–6 ft 1.4 in
Merck Manual: approximately two standard deviations around the mid-parental estimate.
AAP range ±10.2 cm
5 ft 6.1 in–6 ft 2.1 in
AAP EQIPP: ±4 inches, described as covering about 95%; not an individual guarantee.
Target height percentile at age 20
56.4%
US CDC reference at age 20. A position in the height distribution, not the chance of reaching this height.

Girl

5 ft 5 in

Mid-parental target height

Tanner range ±8.5 cm
5 ft 1.6 in–5 ft 8.3 in
Merck Manual: approximately two standard deviations around the mid-parental estimate.
AAP range ±10.2 cm
5 ft 0.9 in–5 ft 9 in
AAP EQIPP: ±4 inches, described as covering about 95%; not an individual guarantee.
Target height percentile at age 20
60.1%
US CDC reference at age 20. A position in the height distribution, not the chance of reaching this height.

This is a rough parent-height estimate of genetic potential, not a final-height guarantee or a clinical growth assessment. Measured heights for both biological parents are needed. Very tall or short parents can have children closer to the population average. Nutrition, illness, puberty timing, and bone age are not included.

What is a height predictor?

A height predictor estimates a child’s possible adult height from the measured heights of both biological parents. This tool uses the mid-parental height method: a sex adjustment is applied before averaging the two parent heights. It presents a central estimate and two reference ranges rather than one guaranteed final height. The height predictor shows boy and girl results together, so you can compare the arithmetic without entering the same measurements twice. It does not use a child’s current age, height, weight, or photograph, and it cannot tell you how much growth remains. Think of the result as a family-based reference that belongs alongside real growth records, not a target a child must achieve.

How to use the height predictor

Start the height predictor with measured adult heights rather than memories or rounded guesses. Measure without shoes and use the same unit system for both parents. English defaults to feet and inches; you can switch to centimeters at any time. Values are stored in centimeters, so switching the display back and forth does not repeatedly round the measurements. If a required value is empty or outside the supported input range, the height predictor hides the results until you correct it. The accepted 120–230 cm range is an application boundary, not a statement about anyone’s health.

  1. Choose Metric or Imperial units in the height predictor.
  2. Enter the measured heights of the biological father and biological mother.
  3. Choose which formula sex to highlight; both boy and girl results remain visible.
  4. Read the midpoint, Tanner range, AAP range, and CDC reference percentile together.

How the height predictor formula works

The height predictor adds 13 cm to the mother’s height for a boy, or subtracts 13 cm from the father’s height for a girl, before averaging the parents. This is the traditional mid parental height approach, also written midparental height. The sex labels select statistical formulas; they do not describe every child’s biology or identity. The height predictor uses centimeters internally even when the display is in feet and inches, preserving the same calculation in both unit systems. Separate reference bands communicate uncertainty: Tanner uses ±8.5 cm, while AAP EQIPP uses ±10.2 cm, approximately ±4 inches.

For a boy

(mother’s height + 13 cm + father’s height) ÷ 2

For a girl

(father’s height − 13 cm + mother’s height) ÷ 2

Height predictor: Tanner reference range

estimated height ± 8.5 cm

AAP reference range

estimated height ± 10.2 cm (± 4 in)

A worked height predictor example

Enter a father’s height of 178 cm and a mother’s height of 165 cm. For a boy, the height predictor calculates (165 + 13 + 178) ÷ 2 = 178 cm. The Tanner interval is 169.5–186.5 cm; the AAP interval is 167.8–188.2 cm. For a girl, the midpoint is (178 − 13 + 165) ÷ 2 = 165 cm, with intervals of 156.5–173.5 cm and 154.8–175.2 cm respectively. The height predictor places these midpoints at about the 56th and 60th percentiles in the corresponding US CDC age-20 references. Those percentiles describe where each height sits in a reference distribution. They do not mean a 56% or 60% chance of reaching that height. Neither result promises a particular growth pattern or the same height difference between siblings.

How accurate is a height predictor?

The height predictor gives a rough estimate, not a precise individual forecast. Tanner and AAP ranges use different conventions, so the wider interval is shown alongside the narrower one instead of replacing it. Merck’s height-potential calculator describes the Tanner interval as approximately two standard deviations; AAP EQIPP describes its ±4-inch interval as covering about 95%. These population descriptions do not establish a personal probability for your child. Read the midpoint and both intervals together.

A height predictor based on two parent heights cannot account for the full range of inherited traits. Children of very tall or very short parents may finish closer to the population average than the simple formula suggests, a tendency called regression toward the mean. That does not mean every child moves toward the average, and this height predictor does not apply an additional correction for it. The limitation is especially relevant when interpreting unusually high or low estimates.

The height predictor also leaves out nutrition, chronic illness, medications, puberty timing, and bone age. Entering more decimal places does not add information about those factors. A result of 178.0 cm is arithmetic precision, not evidence that adult height can be predicted to a millimeter. Repeating the same inputs produces the same answer; it does not supply an independent confirmation.

Use the height predictor as a starting point for understanding family context. A clinician can assess measured growth over time, development, symptoms, and medical history. If a child’s growth slows or its pattern raises concerns, an online estimate should not delay qualified advice. A seemingly reassuring family midpoint cannot rule out a growth problem, and an unusual midpoint alone cannot diagnose one.

Height predictor results versus growth percentiles

The height predictor answers a future-oriented family question; a growth chart compares a child’s current measured height with an age- and sex-specific reference. These are different tasks. The percentile shown here uses the CDC stature reference at exactly 240 months, or 20 years, to describe the predicted adult midpoint. It is a US historical reference, not a worldwide ranking or your child’s current growth percentile. A height predictor result near the 60th percentile means that the target height sits around that position in the selected reference distribution. It does not tell you whether the child will follow that percentile through childhood. Use the height percentile calculator for present measurements, and keep repeated measurements with their dates.

What the height predictor cannot know

The height predictor needs the measured heights of both biological parents. If one is unknown, replacing it with a national average or another caregiver’s height creates a hypothetical example rather than an individual family estimate. For adoption or sperm or egg donation, the relevant issue is whether the biological parent heights are known; the family structure itself is not a reason to exclude someone. The height predictor does not infer an unavailable measurement.

Parent-height measurement errors pass directly into the calculation. If one parent’s entered height is 2 cm too large, the midpoint increases by 1 cm. If both entries are 2 cm too large, it increases by 2 cm. This simple height predictor sensitivity explains why measured values matter. Check units, remove shoes, stand upright, and avoid changing a measurement just to obtain a preferred result.

A child height predictor cannot identify the start or end of puberty, check whether growth plates are open, or interpret an X-ray. It also does not recommend hormones, supplements, exercises, or a diet to reach its midpoint. If the question is “how tall will I be?”, the honest answer from this height predictor is a broad estimate with limitations. A personal assessment requires information that these two parent-height fields do not contain.

Explore the height predictor result

Use height comparison to place estimated heights side by side, or use the height percentile calculator to interpret a current measurement. These tools answer different questions from the height predictor; they do not confirm its forecast.

Height predictor questions

How does this height predictor estimate adult height?

It averages both biological parents’ measured heights after the traditional 13 cm sex adjustment. The result includes boy and girl midpoints, Tanner and AAP reference ranges, and an age-20 CDC percentile. The height predictor does not measure genetic potential directly or guarantee a final height.

Why does the height predictor show two ranges?

Tanner and AAP describe different reference bands around the same midpoint. This height predictor shows ±8.5 cm and ±10.2 cm separately, with their sources. A narrower band is not automatically a better personal prediction, and neither band is a growth goal.

Does the height predictor percentile show a chance of success?

No. It places the estimated midpoint within the US CDC height reference at age 20. For example, the 60th percentile is a position in that distribution. It is not a 60% chance of reaching the midpoint, and it is not the child’s current percentile.

Can this height predictor use my child’s current age and height?

This method uses parent heights only. Age, current height, weight, and bone age do not change its output. A clinical prediction or growth-chart assessment may consider those measurements, but this height predictor does not add an unsupported correction for them.

When should I ask a clinician about growth?

Ask for qualified advice if growth has slowed, the child crosses growth-chart percentile lines, puberty appears unusually early or late, or you have concerns about health or development. The height predictor cannot determine whether an examination or treatment is needed.

When is the height predictor unsuitable or limited?

Both biological parents’ measured heights must be available. Adoption or donor conception affects usability only when the relevant measurements are unavailable; family structure alone is not an exclusion. Very tall or short parents may have children closer to the population average. Nutrition, illness, puberty timing, and bone age are outside this height predictor’s formula.

Sources and methodology

The height predictor uses published mid-parental formulas and presents the Tanner and AAP conventions separately. CDC stature-for-age LMS data provide the age-20 comparison. Read these sources for their original context; a reference formula is not individualized medical advice.

Written and reviewed by